Tel:   +86 20 36013580
         +86 20 36013581  
         +86 20 36013445 
Fax:  +86 20 36013583
Email: sales@dkirubber.com
  • O C Rings & Basic Seals
  • O-Ring
  • X-Rings & Square Rings
  • O-Ring Sizing Chart
  • Encapsulated O Ring
  • O-Ring Kits & Cord
  • Hydraulic & Fluid Seals
  • Rotary shaft seals
  • Custom Molded Shapes
  • Custom Rubber Seals
  • Gaskets
  • Bonded Seal
  • Custom Machined Parts
  • PTFE Products
  • PTFE Rotary Shaft Seals
  • Home > O C Rings & Basic Seals > O-Ring Kits & Cord
     
    O-Ring Kits

    DKI offers many popular sizes, styles and shapes in our popular kits. Many of these kits will solve most of your everyday O-Ring problems

    Convenient O-Ring kit contains wide range of popular sizes, either metric sizes or inch sizes, as per AS568 A, JIS B2401, etc standard sizes. It is ready to use and will give you easy access and storage to whatever size you need. The storage posts are clearly labeled to provide instant size identification. There is even a built in gauge to measure the size of the old O-Ring needing replacement. This kit is available in either high performance VITON, Buna-N, PTFE or Silicone composition.

     

    O-Ring Cord

    The most inexpensive and economical sealing element.

    All major compounds are available.
    Cords are produced by extrusion, it can be made up to any desired diameters, but only good for static application.

    Unlike molded O-rings made in costly machined molds, toroidal, or spliced, sealing rings are made out of extruded elastomeric cord that is end-to-end glued, stapled or hot vulcanized to create a continuous ring. Tolerances for ID and thickness tend to be greater than for molded parts.
    Typically, these seals are used in secondary static applications, such as large flanges, container cover gaskets, door seals in autoclaves and vacuum furnaces, and lid and face seals, where unusually large ID or cross section dimensions or a non-standard O-ring is required.

    If you require further information or enquire, please contact us. Simply call us on: +8620 36013580, or e-mail us: sales@dkirubber.com.

     
      DKI Rubber & Plastic Ltd
    No9, Helong Road, Jiahe, BaiYun District, Guangzhou, 510440 CHINA
    Tel:+86 20 36013580   +86 20 36013581  Fax:+86 20 36013583 Email: sales@dkirubber.com
    Copyright C 2008-2012 www.dkirubber.com  All rights reserved